Saturday

d-series hydrophones


D-SERIES hydrophones






£60 (uk) / £65 (rest of world)

with the option to upgrade the jack to a neutrik for £5 per mic

to order please visit the ordering page





a step up from the basic JrF hydrophones - features:

. higher spec, low noise, flexible specially designed cable

. small profile capsule 

. weighted to submerge to any depth needed

. higher spec element using a new 'ceramic weld' technique

. additional layer of the JrF exclusive 'acoustic transfer' coating

.  quality 1/4 inch jack (rean / neutrik)

. available with 1/4 inch connector only.

for a range of adaptors to connect to XLR inputs and 3.5mm inputs see the adaptors pages

. available as single mono hydrophone or in stereo pairs.

. come with 5metre cables as standard.

extra cable @ £3.50 per metre can be purchased by contacting me by email

see the 'tips and guidance' and 'frequently asked questions' page for further info.

16 comments:

lun hsu said...

hey,,,hello,
just want to know the difference between the hydrophones and the contact mic...

is it right to interpret that hydrophone is one kind of contact mic with waterproof ability?

and the contact mic you sell is a non-waterproof version of your hydrophones?

also,, can u deliver to hong kong?
and how much is the postage rate?

thanks!!

Jez riley French said...

Hi,

1) yes, I can deliver to any country inc. hong kong & the postal rate is as per 'rest of world' option on the drop down menu.

2) no - hydrophones & contact mics are different: firstly the elements are calibrated & constructed to different specs for each, so that they pick up the very different sounds. The hydrophones are fully sealed with several special costings & the contact mics have different coatings that contribute to the sound of the signal.

ta.

lun hsu said...

sorry can I know more? how the coatings makes them different ?
if I contact these mic on the same surface,
like on the outside surface of a glass container, and let water drops into the container, suppose both of them record the vibration from the connection point of the glass, so will it record different sound in such case? and in what way different?

thankssss

Jez riley French said...

you can contact me directly via email to discuss in more detail, but for now:

1) the elements in each are different designs - one is made to pick up the frequencies of signals in water & the other for surface vibrations.

2) the coatings assist in sealing the hydrophone & spreading the frequencies across the surface of the element. On the contact mic they spread the signal also & assist in the way the element responds to mid & low range frequencies.

Anonymous said...

Hello,
What's the difference between the D-serie et the Basic Hydrophone
Thanks

Jez riley French said...

Hi - the differences are listed in the post text - higher spec element, cable & extra layers of acoustic transfer coating. ta.

Taichi Masuda said...

Hello

If i record a whale , Which mic do you recomend ?

And can i use pcm handy recorder with your mic ?

Thanks.

Jez riley French said...

Hi,

either model will be suitable for this & if your recorder is an entry level hand held recorder then the standard hydrophone will be ok. The d-series is intended more for recorders / mixers with higher specification pre-amps.

thanks,

Jez

luz said...

Hi Jez,

I'm looking to use a hydrophone for live vocal performance. Which model would you recommend?

Thanks.

Jez riley French said...

Hi,

either model will do - it depends slightly on what you're connecting it to - send me an email via the contact page. ta.

rastAsia said...

What's the spacial distance between the two mics used for stereo recording? Would it be different for say a frog pond than in the sea for dolphins? Does stereo even exists underwater?

Jez riley French said...

it does indeed depend on the specific location & 'stereo' is not the same as in air. Basically, depending on what is being recorded you can get interesting stereo spatial soundscapes or sometimes 2 mono pools of sound.

neil said...

Hi I have a Sony PCM 10 recorder, is it worth getting this d series hydrophone rather than the standard model for use on this recorder? Will be using it for recording in ponds and rock pools.
Thanks

Jez riley French said...

thanks for your interest. With the PCM10 you'd be ok with a standard hydrophone - not only because of the pre-amps in that recorder but also as a 3.5mm socket is the only input.

José Manuel Berenguer said...

Hello,

Could you tell me if your d-series would work with a Tascam DR 680?

Another question I have is about the time you could deliver one stereo pair in Barcelona.

All the best


Jez riley French said...

yes - they work with the DR680 & DR680 mkII.

for dispatch times please email me: tempjez@hotmail.com